The Linksys LN1100 supports a plug-and-play setup right out of the box, which automatically configures your mesh network, including any associated Linksys LN1200 child nodes that it came with. It's a seamless process designed for one-time use. However, if you have to reset the router, you will need to manually set it up again. 

For PPPoE connections, this method is not supported. The router will need manual configuration to get online.

Linksys offers several methods for you to choose from, depending on what you are most comfortable with.
 

---

 

Using the Pair button

 

The Pair button is the easiest and quickest way to set up both your LN1100 v2 and child nodes.

Before you begin:

 

• • Parent router/node - The parent router refers to the Linksys LN1100 v2 router that will be connected to your modem.
  • Child node - An additional node to expand your WiFi such as a Linksys LN1200 or another Linksys LN1100 node.
  • Learn more about the status light of the Linksys LN1100.

 

1. Gather all your equipment in the same area as your modem. After the nodes are set up, you can relocate your child nodes as needed.

 

2. Power ON all your nodes. The child nodes need to be near the parent router, ideally within 10 ft and in the same room, the closer the better. Wait until all your nodes display a solid blue light, indicating they are ready for setup.

If any of the nodes do not have a solid blue light, reset them by holding down the reset button for about 15 seconds, then wait until the light becomes solid blue.

 

3. Remove any existing router.

 

a. I have a modem with a separate router.

• • Disconnect your existing router.
  • Power cycle your modem.
  • Wait until your modem has rebooted and go to the next step.

 
b. I have a WiFi router and modem combined in one device or I do not have any existing routers in my home.

 

• • Go to the next step.

4. Connect the Linksys LN1100 router with an ethernet cable to your modem. 

 

 

 

5. Press the Pair button for 1 second.

 

 
 
The light on the router will begin blinking. Wait until your router has a solid white light. This indicates that the router has been configured as a parent router and it is now online.

 

 
6. Wait for the light on the child nodes to also turn solid white.

 

 

7. Once all your nodes have a solid white light, your WiFi is ready to use. Connect your devices to the default WiFi.

 

The default WiFi credentials are located at the bottom of the Linksys LN1100 that is connected to your modem. For mobile devices, you can scan the QR code located at the bottom. 

 

 

To manage and customize your network settings, you can log in to the Linksys LN1100 web browser.

 

---

5-Button push setup

The 5-Button push method offers the easiest and quickest way to set up both your Linksys LN1100 and LN1200 child nodes for an internet connection using DHCP (automatic) simultaneously.

Before you begin:
 

• Supported on both Linksys LN1100 v1 and v2.
• Parent router/node - The parent router refers to the Linksys LN1100 router that will be connected to your modem.
• Child node - An additional node to expand your WiFi such as a Linksys LN1200 or another Linksys LN1100 node.
• Learn more about the status light of the Linksys LN1100.

1. Gather all your equipment in the same area as your modem. After the nodes are set up, you can relocate your child nodes as needed.

2. Power ON all your nodes. The child nodes need to be near the parent router, ideally within 10 ft and in the same room. Wait until all your nodes display a solid blue light, indicating they are ready for setup.

If any of the nodes do not have a solid blue light, reset them by holding down the reset button for about 15 seconds, then wait until the light becomes solid blue.