How to disable Wi-Fi (Verizon)
This article will walk you through general instructions on how you can disable the Wi-Fi on the listed Verizon-supported devices.
- Fios Quantum Gateway / Fios Actiontec MI424WR / Actiontec GT784WNV
- D-Link® DSL-2750B
NOTE: Steps and instructions may vary depending on your gateway’s model. If your model is not on the list below, contact your device’s manufacturer for support.
Before you begin
- Make sure the computer you use to access the web-based setup page of your router or gateway is either wired directly to it or is connected via Wi-Fi.
- Make sure to know your login credentials as these differ for every manufacturer. Contact your device’s manufacturer for support.
Fios Quantum Gateway / Fios Actiontec MI424WR / Actiontec GT784WNV
1. Launch a browser, enter “https://192.168.1.1” in the address bar, and press [ENTER].
2. Enter the login credentials for your device.
3. Click on WIRELESS SETTINGS.
4. Click on Basic Security Settings.
5. Click the Off radio buttons of both bands (2.4 GHz and 5 GHz).
6. Click Apply.
D-Link® DSL-2750B
1. Launch a browser, enter “https://192.168.1.1” in the address bar, and press [ENTER].
2. Enter the login credentials for your device.
3. Click on Wireless Setup.
4. Under WIRELESS NETWORK SETTINGS, uncheck the Enable Wireless option.
5. Click on Apply Settings.
4741
