PRODUCT INFORMATION
You can connect the following devices to the Linksys LGS116 switch:
- Computers
- Routers
- Switches
- Network printers
- Other network devices
The Linksys LGS116 V1 and LGS116 V2 have different dimensions as listed below:
- LGS116 V1: 280 x 120 x 25 mm (LxWxH)
- LGS116 V2: 288 x 102 x 26 mm (LxWxH)
Gigabit switches can minimize transfer times and allow you to stream high-bandwidth files to connected devices without interference.
The Linksys LGS116 switch is compliant with IEEE 802.3, 802.3u, 802.3x, 802.3ab, and 802.3az standards.
Yes, the Linksys LGS116 can be wall-mounted.
No, a switch does not have this capability. Only routers or modems with DHCP capabilities can allow sharing of internet connection between computers. However, a switch can allow more computers to connect to a local network, and for the computers to have internet access, the switch should be connected to a router or a modem.
The Linksys LGS116 v1 and v2 have a 5-year warranty.
Yes, the switch has a QoS feature. However, the Linksys LGS116 is not a manageable switch; therefore, the QoS setting is predefined and can't be configured or customized.
TROUBLESHOOTING
Make sure that the network cabling is crimped securely and installed properly.
Follow the steps provided below to resolve this issue:
- 1. Verify if the switch and the computer are connected properly and the indicator lights on the switch are properly lit as outlined below:
- System indicator light - Solid blue
- Link/Act/GB indicator lights - Either green or orange and solid or blinking depending on the speed and status of the connection
View details about the indicator lights and features of the switch.
2. Power down everything then power up the switch then do the same to the computer.
Only routers or modems with DHCP capabilities can connect a computer to the internet. For a computer on a switch to have internet access, the switch should be connected to a router or a modem.
