The Linksys MX4200 v2 WiFi 6 Whole Home Mesh System supports the latest WiFi® 6 (802.11ax) standard to deliver next-level streaming and gaming. It offers faster WiFi performance for lag-free online gaming and simultaneous streaming to any device.
With the powerful WiFi 6 Mesh coverage, this is designed to deliver gigabit WiFi speeds to every corner of your home, including the backyard and outdoor smart home devices.
Features
- IEEE 802.11ax
- Tri-band
- Eight Spatial Streams
- Apple® HomeKit®
- Next-generation Orthogonal Frequency-Division Multiple Access (OFDMA) technology
- 1.4 GHz quad-core processor
- Intelligent Mesh™
- Easy Setup
- WiFi security
- Seamless Roaming
- Guest network
- Parental Controls
- Supports 20 MHz, 40 MHz, and 80 MHz wide channels
- Coverage of up to 2,700 sq ft per node
- Ports:
- Three gigabit ethernet ports
- One gigabit internet port
- Power port (12V, 3A)
- One USB 3.0 port for external storage support. The supported formats are as follows:
- Windows®: NTFS, FAT32
- Mac®: FAT32, and HFS+ (journaled, non-journaled)
- Supports SMB v2.0
- UPnP®
- Supports up to 900 mA current draw
- Buttons and switch
- Reset button
NOTE: To reset the node to its factory defaults, press and hold the button first (you will see a bright red flash, followed by three to four quick red faded pulses then another bright red flash), then you can release the button. - Wi-Fi Protected Setup™ (WPS) button
- One power switch (sliding)
- Weight: 0.94 kg (2.15 lbs)
- Dimensions: 4.45 in x 4.45 in x 9.57 in
- Reset button
Setup requirements
- A modem or gateway with an active internet connection
- The latest version of the Linksys app
- Latest iOS or Android™ device
- Bluetooth® (preferred for setup)
- Apple Home app (For HomeKit feature)
Package contents
- Linksys MX4000 v2 (three-pack, two-pack, or one-pack)
- Ethernet cable (one for each node)
- Power adapter (one for each node)
- Quick installation guide