Say Hello to the Linksys FGMM1000
The Linksys FGMM1000 5G WiFi 6 Industrial Router is an indoor router for internet service providers (ISPs) in Hong Kong. It supports WiFi 6, 5G, and LTE networks and features AX1800 speeds, ensuring that the overall connectivity of your device remains stable and strong.
- Wi-Fi® 6 Industrial router
- Sub-6 and mmWave
- Network deployment:
- Option 3x/3a for Non-Standalone Architecture (NSA)
- Option 2 for Standalone Architecture (SA)
- IP30 rating
- Port Forwarding
- Port Filtering
- 2x2 Spatial streams
- Supports 4FF Nano SIM card
- Supports up to 32 clients
- Dimensions: 224.5 mm x 123.1 mm x 49 mm (L x W x H)
- Weight: 850 g
- Buttons
- Power button (three-pin connector)
- Reset button/pinhole (remove the cover to see the button)
- Ports
- One RS-232 serial port
- One RS-485 serial port
- One USB-C® port for debugging
- One 2.5 Gigabit port
- Four removable antennas
- NANO USIM slot (remove the cover to see the slot)
- Indicator lights
- Linksys FGMM1000
- Four detachable antennas
- One ethernet cable
- Power adapter (12V, 3A)
- Wall mounting kit
- Quick start guide
The hardware version is located beside or beneath the model number and is labeled version, ver., or V. If there is no version number beside the model number on your Linksys product, the device is version 1. If you still have trouble finding your version number, see the complete article to learn more.
Setting up the Linksys FGMM1000
1. Connect the four antennas to the router.
2. Remove the cover and insert the SIM card into the slot until it clicks.
3. Connect the power cord into the power port on the router and connect the other end to a power outlet.
4. Using an ethernet cable, connect your computer to the ethernet port on the router. You may also opt to connect a WiFi device to the WiFi name of the router. The default WiFi name and password are located on the product label.
5. Check the lights on the router. Once all the lights are lit, check if your computer or WiFi device has a proper internet connection.
Once you have successfully connected to the internet, you can now connect other clients to the WiFi.
Are you still having trouble setting up your router? Click More for additional help.
1. Log in to the Linksys FGMM1000’s web interface.
2. Go to Network.
3. Under Mobile Network, select WiFi Settings.
4. The settings for 2.4G and 5G will be shown. Click the Edit button of the network for which you want the WiFi name and password updated.
5. Update your WiFi credentials. Click on Apply to save your changes.
Resetting the Linksys FGMM1000
1. Log in to the Linksys FGMM1000’s web interface.
2. Go to Administration and choose Factory Reset under Device Management.
3. Under Factory Reset, click on RESTORE FACTORY SETTINGS.
Select each category below to view the articles.
- Linksys FGMM1000 FAQs
- Overview of the Dashboard page of the Linksys FGMM1000 and FGMM601
- Overview of the Application page of the Linksys FGMM1000 and FGMM601
- Overview of the Administration page of the Linksys FGMM1000 and FGMM601
- Overview of the Engineer page of the Linksys FGMM1000 and FGMM601
- Overview of the Network page of the Linksys FGMM1000 and FGMM601
- Overview of the About page of the Linksys FGMM1000 and FGMM601
- Light behavior of the Linksys FGMM1000
