HARDWARE INFORMATION |
|
| What is the Linksys SPNMX56BF? |
The Linksys SPNMX56BF features one 2.5 Gbps WAN port and offers massive simultaneous capacity for video, gaming, and high-speed data. It is easy to add to a modular system of nodes to give you flawless WiFi everywhere and easily replaces a traditional connection router with a mesh system.
This router is for BeFibre® subscribers in the UK. |
| Where can I find the node’s serial and model numbers? | The serial and model numbers are printed on the product label. You can also identify the node through the following:
|
| What is the warranty on the node? | For warranty information, contact BeFibre. |
| Does it have indicator lights? | The node has one status indicator light that gives you information about its operation. |
| Can it be wall-mounted? | No, this is not supported. |
| Is it compatible with the Linksys Intelligent Mesh™ system? | Yes. |
| Is it compatible with the Linksys Cognitive™ Mesh system? | No, Linksys Intelligent Mesh products are not compatible with Linksys Cognitive Mesh products. |
| How many ethernet ports are there on the node? | It has four ethernet ports:
|
| What are its weight and dimensions? | The weight and dimensions are as follows:
|
SETUP AND INSTALLATION |
|
| How do I set up the node? | BeFibre installers will provide first-time installation. However, if you have reset your node, you need to reconfigure it through Auto Configuration Server (ACS) setup. |
| What are the requirements for setting up the node? | You will need the following:
|
| How do I add a child node to the Linksys SPNMX56BF? |
There are a few ways to add a child node. You can also add a node that is not from BeFibre, as long as it's set up as a child node, not a parent. However, be aware that it may not support all the features offered by BeFibre. Contact BeFibre first. |
| Where can I find the default WiFi name and password? | These can be found on the router's product label. The default WiFi name is BeFibre followed by the last four characters of the node’s MAC address (i.e., BeFibre_xxxx). Each router has a unique pre-assigned WiFi password. |
| What is the default administrative password? | The default admin password is the same as the default WiFi password found on the product label. |
| How do I configure the WiFi access for guests? | You can enable WiFi access for your guests through the Guest Access/Guest Network feature on the Linksys app. |
| How do I configure Parental Controls? | You can enable Parental Controls using the Linksys app to schedule a pause or pause internet access for your connected devices. |
| Can I set up the node using the Linksys app? |
No. The node supports the BeFibre automatic setup via ACS. Once the node is connected from the Internet port to the BeFibre equipment, it will begin to self-configure. If you try to set up the node with the app at this time, it will not detect the node. This is because it is detecting and setting up an internet connection for the parent node. Wait until the status light is solid blue, which means that the node is online and ready to use. You can then add the node to your Linksys app to manage your network. |
WIFI SETTINGS |
|
| What WiFi security modes does it support? | The Linksys SPNMX56BF supports the following settings:
|
| Does it support Wi-Fi Protected Setup™ (WPS) pairing? |
Yes, the node supports WPS. This can be set up through the Linksys app. You can also log in to the router's web interface and go to Wi-Fi Settings > Wi-Fi Protected Setup section to configure WPS. |
| Does it support HomeKit®? | While the Apple® HomeKit integration feature is not supported, your HomeKit-enabled devices will still function normally as they are treated as regular clients on your network. |
ADVANCED TROUBLESHOOTING |
|
| How do I upgrade the node's firmware? | The node will automatically update whenever new firmware is available. |
| Can I manually upgrade the firmware? | The node doesn't support retail firmware or manual firmware updates. It only allows automatic firmware updates directly from BeFibre. |
| How do I check the firmware version? |
You can check the firmware version by logging into the Linksys app in the Network Administration > Nodes section. You can also log in to the router's web interface and go to Router Settings > Connectivity > Basic. Click the drop-down arrow next to Details in the Firmware Update section and look for Current Version. |
| How do I reset the node? | Press and hold the reset button until the light on the top turns red, fades, and then flashes bright red. Make sure you see a bright red flash, followed by three to four quick faded red pulses, and then another bright red flash before you release the button. |
| How can I use the Linksys app to manage my WiFi? | The Linksys app allows you to monitor and manage your node, as well as connect to your home network from anywhere and at any time. Here is a compilation of support articles to help you learn how to use the app and answer any questions you may have about it. |
