This article will provide an overview of the Management tab of your Linksys E9450 router. This article is for Linksys E9450-AH, E9450-CN, E9450-JP, and E9450-KR.
Log in to the Linksys E9450 router's web interface. Once you are in the web interface, click on Management.
The Management tab has the following categories:
1. Settings - Back up a config file, restore a config file or restore the router settings to factory defaults.
2. Internet Time - Configure your time settings.
3. Access Control - Change the router’s admin password. Make sure to use admin as the username.
The required password settings are
- At least 10 characters in length
- At least one upper case letter
- At least one lower case letter
- At least one number
- At least one special character
- Must not use consecutive identical characters
- Values used in the login ID and password shall not be the same
- Must not use a space in the beginning or ending
- Should not contain non-ASCII characters
4. Firmware Upgrade - Check if a new firmware is available by clicking Check Firmware or by manually updating the firmware.
5. Reboot - Reboot the router.
6. Language – Allows you to change your preferred language.
