The Incredible-WiFi section provides easy access to essential network customization options. You can update your WiFi name and password, modify advanced settings, set up a Guest network, and fine-tune additional configurations to suit your needs.

 

Before you begin:

 

• If your model supports the Quick Setup option, you can use this option to rename all your radios using the same WiFi name, password, and security, except the Guest network.
• Under the Incredible-WiFi section, there are three sub-categories, and these are WiFi, Advanced, and MAC Filtering.
• Settings may vary by model.
• Supported models:
  • LN1600 series
  • SPNM60, SPNM62

 

---

 

Images vary by model.

 

To configure settings on this tile, follow these steps:

 

1. Log in to the router's web interface.

 

2. Click on the Menu tab.

 

 

3. Click on the Incredible-WiFi tile.

 

4. Configure the necessary settings by clicking on the edit  icon. Then, make sure to click Save to apply your changes.

 

For SPNM60 and SPNM62 models:

 

• Quick Setup is enabled by default. This method allows you to change the name, security, and password quickly. For advanced settings, turn OFF Quick Setup

• To view the default Guest password, turn it ON and click on . If you make changes, make sure to give it a different name from your main WiFi and click Save.

 

Quick Setup enabled

 

 

Quick Setup disabled

 

For LN1600 series: 

 

 

---

Advanced

 

In this section, you can configure other advanced WiFi settings.

 

 

Learn how to enable MLO.

 

---

 

MAC Filtering

 

MAC Filtering is used to deny access to specific devices on the WiFi network. It is recommended to verify the MAC address of your device to confirm the setting. 

 

If the client device has a Private Wi-Fi Address or Random MAC enabled, which changes its MAC address at various times, the device will not follow the Deny rule, and the device will be allowed on the network due to the device using a different MAC address. 

 

To check or change this setting on your device, click here for iOS devices or click here for Android™ devices.

 

 

How to enable MAC Filtering:

 

1. Toggle to enable WiFi MAC Filtering.

 

2. Click on the arrow icon on the second row.

 

 

3. Select either of the two options:

 

 

• a. Select from my device list - Select a device and click Add.
•  
• 

 

• b. Manually add device - Enter the MAC address of a device in this format xx:xx:xx:xx:xx and click Save.
•  
• 

 

4. Click Done.

 

 

5. Click Save.

 

 

6. Click Turn On when prompted.

 

 

When MAC Filtering is enabled, you will see the following:

 

 

How to turn OFF MAC Filtering or to remove a device:

 

1. To turn it OFF, toggle the MAC Filtering to the OFF position and then click Save.

 

 

2. Click Turn Off when prompted.

 

 

3. To remove a device from MAC Filtering, click the Devices section.

 

 

4. Click Edit and select the device you want to remove from the list. Click Remove.

 

 

5. Click Done.

 

 

6. Click Save.