How to change the Access Timeout settings of a Linksys Managed Switch for Business
The Linksys Managed Switches for Business provide a built-in browser interface that allows you to configure and manage via Hypertext Transfer Protocol (HTTP) and Hypertext Transfer Protocol Secure (HTTPS) requests selectively to help prevent security breaches on the network. You can manage your HTTP and HTTPS settings for each switch further by configuring session timeouts for HTTP and HTTPS requests. Follow the steps below to learn how to change the Access settings of your switch.
1. Access the web interface of your switch. For instructions, click here.
2. Click on the menu icon located at the upper-left corner of the web interface.
3. Select Security then Access.
4. On the Web tab, enter your preferred session Timeout. The default setting is 5 minutes.
5. Then, enable or disable the setting for HTTP or HTTPS Services.
NOTE: The HTTP Service is enabled while HTTPS is disabled by default.
6. Click Apply on the upper-right side of your screen to save the settings.
2. Click on the menu icon located at the upper-left corner of the web interface.
3. Select Security then Access.
4. On the Web tab, enter your preferred session Timeout. The default setting is 5 minutes.
5. Then, enable or disable the setting for HTTP or HTTPS Services.
NOTE: The HTTP Service is enabled while HTTPS is disabled by default.
6. Click Apply on the upper-right side of your screen to save the settings.
