If you have an existing Linksys Mesh WiFi system and would like to add a child node, follow the instructions below. Steps and images may vary depending on the operating system of your mobile device or the model of your Linksys Mesh system. This article is for [_Linksys WHW0x, MX, or MR series routers_][1]. **Before...
Rebooting your router switches it OFF and ON again. All connected devices will briefly disconnect but automatically reconnect afterward. Resetting the router erases all settings, restoring it to factory defaults. You'll need to reconfigure the router based on your network setup. **Why reboot or reset your router?**...
The Linksys Mesh routers allow you to extend your existing network through bridge mode. When in bridge mode, the Linksys Mesh router will not have its own separate network. All nodes and client devices connected to the router will be on the same network and can communicate with other devices within the network. Thi...
_**TABLE OF CONTENTS**_ **HARDWARE INFORMATION** 1. [_What is the Linksys SPNMX42GC-UK for Gigaclear ISP WiFi 6 Whole Home Mesh System?_][1] 2. [_How do I check the model number of my Linksys SPNMX42GC-UK?_][2] 3. [_What are the parts of the Linksys SPNMX42GC-UK?_][3] 4. [_What are the features of the L...
You can now use the LinksysSmartWiFi.com page, a browser-based administrative tool to view and change settings in your Linksys Mesh WiFi system. **Before you begin ** * A configured parent node. If you need to set up the parent node first, click below for instructions: * [_For iOS_][1] * [_For Androi...
This article will help you create or change your router’s admin password through the Linksys app or LinksysSmartWiFi.com page. **NOTES: ** * The default password of a Linksys Intelligent Mesh router that has older firmware is **admin**. * With the latest firmware, routers that support IMDA no longer use admi...
It is recommended to add the child node to your **Linksys Intelligent Mesh™** system using the Linksys app. However, if you would rather set up the child node manually, follow the steps below. **Before you begin** Make sure you have the following ready: * A configured parent node. If the parent node is all set...
**_Scenario: What can I connect to the USB port of my Linksys Mesh system?_** You can connect an external storage device to the USB port of your Linksys Mesh system to share the entire drive on your network. The supported formats may vary depending on the model. The table below shows the supported file for...
The **Advanced Settings** feature allows you to configure the **Internet Settings**, **Port Settings**, **Wi-Fi MAC Filters**, and **Local Network Settings** of your Linksys Intelligent Mesh network using the Linksys app. This article provides an overview of this feature. To access this feature from the dashboard, ...
You can add child nodes to a Linksys Intelligent Mesh™ network using the following methods: * * [5-Press setup method][1] - This process does not require a mobile device or computer. * [CA Router Setup tab][2] - This method requires a computer. * [Linksys app][3] - This option requires a mobile device. ...