How to configure VLAN on your Linksys Smart Wi-Fi Router
To establish a connection to the internet, some internet service providers (ISPs) require virtual LAN (VLAN) to be enabled on your Linksys Smart WiFi Router's WAN connection. VLAN settings configure the router to work with IPTV, VoIP and other services that may be provided by your ISP. Follow the steps below to learn how to do this.
This feature may not be supported in some Linksys Smart WiFi Routers.
This feature may not be supported in some Linksys Smart WiFi Routers.
2. Click the Connectivity under Router Settings.
3. Click the VLAN tab.
4. Toggle the VLAN button to ON.
| VLAN | OFF by Default |
| Select Profile | Select a pre-configured profile for your ISP's required VLAN settings. If your ISP is not on the list, select Manual and enter the VLAN information provided by your ISP. |
| Ethernet | Some ISP profiles dedicate Port 3 for Voice and Port 4 for Video. If this is needed, a VoIP device needs to be connected directly to Port 3 and a Video device (such as an IPTV) needs to be connected to Port 4. The other ports (1 and 2) are treated as Data traffic and devices will still get online but treated as Data traffic. |
5. In the list, there are several pre-set ISP configuration files. Select the profile for your ISP.
In this example, M1 (Fibre) is used.
If your ISP is not listed, select Manual. Enter the VLAN ID supplied by your ISP in the ID box then select the appropriate Tag and Priority.
6. Click Apply > Ok to save the changes.
You have now successfully configured the VLAN of your Linksys Smart WiFi Router.
2652
