Say Hello to the Linksys SPNMX56BF
The Linksys SPNMX56BF features one 2.5 Gbps WAN port and offers massive simultaneous video, gaming, and high-speed data capacity. It is easy to add to a modular system of nodes to give you flawless WiFi everywhere and easily replaces a traditional router network with a mesh system.
This router is for BeFibre® subscribers in the UK.
- Linksys Intelligent Mesh™
- Wi-Fi® 6 Dual-band AX5400
- 2x4 spatial streams
- TR-069 support
- Supports Auto Configuration Server (ACS) / automatic setup
- Guest network
- Parental Controls
- WiFi security
- Safe Browsing
- Wi-Fi Protected Setup™ (WPS) support
- Dynamic Frequency Selection (DFS) support
- Status light/Indicator light
- Dimensions (L x W x H): 3.385 x 3.385 x 7.3 in
- Weight: 0.50 kg (1.1 lb)
- Buttons and Switch
- WPS button
- Reset button
- Power switch (sliding)
- Ports
- Three ethernet ports (1 Gbps per port)
- One internet port (2.5 Gbps)
- Power port (12V, 2A)
- BeFibre internet connection
- Latest Linksys app
- Latest desktop browser
- Linksys SPNMX56BF
- Ethernet cable (CAT5e)
- Power adapter (for UK)
- Legal insert
Setting up the Linksys SPNMX56BF
1. Connect an ethernet cable from your BeFibre modem's port to the internet port of the Linksys SPNMX56BF.
2. Turn ON your Linksys router.
3. The router will display a solid purple light which indicates it’s ready for setup.
Within a few minutes, the router’s indicator light will start flashing in white, which means the router is going through automatic setup.
4. Wait until the light turns solid blue, this indicates that the router is now online and ready to use.
Are you still having trouble setting up your router? Click More for additional help.
1. Open the Linksys app.
2. Log in to the Linksys app dashboard.
3. Tap the menu icon.
4. Tap on Wi-Fi Settings.
5. Tap the field you want to change on the Wi-Fi Settings and then tap Save.
Resetting the Linksys SPNMX56BF
1. Press and hold the Reset button at the bottom of the device.
The light at the front of the router will flash bright red, pulse dimly three times, flash bright red again, and then turn OFF. You can release the reset button after this process, which takes 10-20 seconds.
2. Wait for the light to turn solid purple, indicating it is ready to be set up.
Select each category below to view the articles.