Say Hello to the Linksys MX2000
The Linksys MX2000 series routers with Intelligent Mesh™ deliver the true power of Wi-Fi® 6. From next-level gaming to streaming your favorite content, get a faster connection and wider coverage for more devices on your network.
- Linksys Intelligent Mesh technology
- Wi-Fi 6 (802.11ax)
- Dual-band AX3000
- Speeds of up to 3 Gbps
- 2x2 Spatial streams
- Guest WiFi
- WiFi Security
- Parental Controls
- Dynamic Frequency Selection (DFS)
- Supports parent and child mode
- Weight: 1.16 lb (526.16 g)
- Dimensions: 3.4 in x 3.4 in x 7.3 in (per node)
- Buttons and Switch
- Reset button
- Wi-Fi Protected Setup™ (WPS) button
- Sliding power switch
- Ports
- One gigabit internet port
- Three gigabit ethernet ports
- One power port (12V, 1.5A)
- Internet connection
- The latest version of the Linksys app
- iOS or Android™ mobile device
- Linksys cloud account for remote access
- Linksys MX2003 (three-pack), MX2002 (two-pack) or MX2001 (one-pack)
- One ethernet cable per node
- One power adapter per node
- Quick installation guide
- Regulatory and warranty documentation
The hardware version is located beside or beneath the model number and is labeled version, ver., or V. If there is no version number beside the model number on your Linksys product, the device is version 1. If you still have trouble finding your version number, see the complete article to learn more.
Meet the Linksys MX2000 and experience its simultaneous capacity for video, gaming, and high-speed data. It is easy to add to a modular system of nodes to give you flawless WiFi everywhere and can seamlessly replace a standard router with mesh WiFi.
1. Power ON your router and connect it to your modem using an ethernet cable.
2. Connect your mobile device to the router's default WiFi name.
3. Open the Linksys app.
- Tap Set up a New Wi-Fi Network (iOS)
- Tap Launch setup (Android)
4. Tap Velop and Mesh Routers then follow the on-screen instructions.
Are you still having trouble setting up your router? Click More for additional help.
1. Open the Linksys app.
2. Log in to the Linksys app dashboard.
3. Tap the menu icon then tap on Wi-Fi Settings.
4. Tap the field you want to change and then tap Save once done.
1. Press and hold the Reset button at the bottom of the device.
The top light of the node will flash bright red, pulse dimly three times, flash bright red again, and then turn OFF. You can release the reset button after this process, which takes 10-20 seconds.
2. Wait for the light to turn solid purple, indicating that the node is ready to be set up.
Select each category below to view the articles.
